CM Classic ZL special (ZL3MH, later ZL2OQ) dual phased dipole fed with crossed feeder
CM Model created by Roger Walker, GW6HRU
CM 
CM UK Bandplan reminder:
CM      1.800   1.850   1.825   164.27  160m*
CM 
CE
SY M=10		'Midpoint Height above ground
SY E=M-2	'Endpoint Height above ground
SY F=1.825	'Target centre frequency
SY R=0.0005	'Wire radius
SY V=0.962	'Wire velocity (also adjusts for nearness to ground and reflector)
SY G=8		'1/8 wavelength gap (as decimal so 4nec2 can optimise it)
SY CW=299.792458/F	'Wavelength #1
SY CF=CW/1400	'Feedpoint size
SY CL=CW*V/4	'Driven wire length #1 (each is a 1/4 wave)
SY CG=CW/G	'Gap between driven and reflector
SY CZ=M-E	'Vertical difference from centre to ends
SY CX=sqr((CL-(CF/2))^2-CZ^2)+(CF/2)	'X position of horizontal endpoint of driven elements
GW	11	20	0	0	M-CF	-CF	CG/2	M	R	'Wire to front left
GW	12	40	-CF	CG/2	M	-CX	CG/2	E	R	'Front left
GW	21	20	0	0	M+CF	CF	CG/2	M	R	'Wire to front right
GW	22	40	CF	CG/2	M	CX	CG/2	E	R	'Front right
GW	31	20	0	0	M+CF	-CF	-CG/2	M	R	'Wire to front left
GW	32	40	-CF	-CG/2	M	-CX	-CG/2	E	R	'Front left
GW	31	20	0	0	M-CF	CF	-CG/2	M	R	'Wire to front right
GW	32	40	CF	-CG/2	M	CX	-CG/2	E	R	'Front right
GW	99	1	-CF	-CG/2	M	CF	-CG/2	M	R	'Feed point between rear left and right
GE	1
LD	5	0	0	0	58000000
GN	2	0	0	0	17	0.007
EK
EX	0	99	1	0	1	0	0	'Load 0=Voltage source, feeding tag 99, segment 1
FR	0	0	0	0	1.825	0
EN